Seluque

Factory and laboratories Elias Fausto - SP
Maria Vitória de Oliveira Street, 131 - Carimã
13350-000 - Elias Fausto/SP - BRAZIL
Fone: +55 (19) 3821-1919
Fax: +55 (19) 3821-2495

Contact:

seluque@seluque.com.br

vendas@seluque.com.br

Location


Click on the image to open the map.


Arriving in Elias Fausto


Products


Voltar


Servo-Piloted Set

Servo-Piloted Set
Servo-Piloted Set Seluque

The servant-piloted sets Seluque are destined to the grease centers with several ranks of work linked on the same set of grease and facilitate the project of systems of shine totally automatic or of a simple rank of work.
The servant-piloted sets Seluque can be 100% pneumatic or equipped with electronic sensors and electrovalvules that that facilitate its application in automatic systems or more sophisticated.
The servant-piloted sets Seluque congregate in an only block, all the components that the designer needs to construct a point of shines of high precision, great flexibility and versatility.

In some factories, there isn't electronic equipment for the control of the grease equipment. With the use of the feeders servo-piloted sets, it's gotten all the precision and flexibility of the feeders Seluque®, model DR-001 and is made possible the use of grease centers 100% pneumatic.



A) Technical Features - Hydropneumatic Converter:
  • Pneumatic pressure of work: minimum = 5 Bar / cm² maximum = 10 Bar / cm²
  • Regulating valve of the pneumatic pressure
  • Indicating manometer of the work pressure
  • Connection of grease entrance: female thread of 3/8" - BSP
  • Hydraulical connection of entrance and exit of grease = female thread of BSP
  • Body constructed in natural plated duralumin
  • Pneumatic prohibitions in nitrilic rubber
  • Hydraulical vedations in fluorocarbon
  • Capacity of hydropneumatic converter = 100 ml
  • Sensors of end-of-course magneto-pneumatic or, optionally, electronic
  • Servo-piloted valve Seluque, model VE-101, with female thread of 3/8"BSP
  • Connection for pilot air for valve Seluque® VE-101 - female thread M-5
  • Servo-piloted valve built in usinated brass
  • Maximum pressure of entrance of the servo-piloted valve = 200 Bar/cm2


B) Technical Features - Grease Feeder:
  • Volumetric feeder type cylinder of positive displacement.
  • Repeatability ± 1%
  • Adjustment of the dosed volume - micrometric screw
  • Precision ± 5% measured at the calibration point (work point)
  • Drive - air to dose; air to replenish (the pneumatic valves aren't supplied with the feeder)
  • Magnetic piston at the motor cylinder (it authorizes the use of position sensors)
  • Grease feeding - female thread of 3/8"BSP
  • Grease exit - female thread of 1/8"; 1/4"; 3/8"or 1/2" BSP, varying according to the capacity of dosage of the incorporated feeder to the servo-piloted set.
  • Pneumatic feeding - minimum = 5 Bar/cm2; maximum = 10 Bar/cm
  • Standardized bands of work: 0,05 a 0,50 ml
    0,10 to 1,00 ml
    0,50 to 3,00 ml
    3,00 to 10,00 ml
    10,00 to 30,00 ml
    30,00 to 50,00 ml
    50,00 to 100,00 ml

For more information about this product make contact

Back

© All the rights reserved Seluque® - Developed by Guia-se